Keyboardpartner-Forum

Is it possible to change the function of the common presets ?

SW2 is now a toggle between group 1 and 2 ( the only that is usefull )
SW4 is now a toggle between group 1 and 3
SW6 is now a toggle between group 1 and 4
SW8 toggles preset switch marked with 5 ????

What’s the meaning of all that ?

Alter the presets on preset16 combinations , and program it in a common preset by pressing more than 2 seconds ( like on the upper preset16 panel )
changes nothing !

Can it be changed in Remote or in another way ?
Please help ! This is very annoying .

Common preset keys simply call both manual presets 1, 2, 4 and 8 simultaneously. From FW 3.925 it is easier to select combinations of 2 to 4 common presets (multiple buttons pressed at the same time, so 15 combinations are possible). In addition to drawbar settings the common presets always save percussion and vibrato setting.

Firmware *_btnvib uses common preset buttons as vibrato knob substitute (V1..V3 select and Chorus toggle).

Firmware *_btnvib uses common preset buttons as vibrato knob substitute (V1..V3 select and Chorus toggle).

How to install this in combination with the Firmware V3925 ,
( the one with the Drawbar 9 MPX switching signals for mk2/mk3 boards provided on pin 6 and 7 of PL5 )
without affecting the rest of the organ software ?

What do you mean with Firmware *_btnvib ?